"Possible" Group-Buy for 20 Rd, Mec-Gar BHP Magazines.
Sept 30, 2020 10:25:40 GMT -5
Poohgyrr likes this
Post by Bob Reed on Sept 30, 2020 10:25:40 GMT -5
Hello, Everyone,
Who all is interested in obtaining some new, 20 Rd, Mec-Gar Magazines for our beloved Browning Hi-Power!
First and foremost, we as a group should have at least a 3 mag per-member 'minimum order' requirement (5 mags minimum will greatly help) in getting the necessary attention for this endeavor to be successful. Obviously, 10 mags minimum per-member would greatly help our chances. (Personally, I'd love to see at least 1 Million of them in the hands of "The People" all across America, and at least that many again spread across the rest of the world).
Note: Mec-Gar's bluing is simply beautiful - however, I was hoping that Mec-Gar would either apply a Phosphate Finish or, their Anti-Friction Coating to these and, add witness holes down the magazine's spine (not along the side, but down the back) showing 5, 10, 15 and 20 rounds loaded. But, I'd gladly settle for their standard issue, blued ones w/out witness holes like the ones I already own & love.
Edited to add: For those that aren't familiar with Mec-Gar's 20 Rd Magazine for the Hi-Power; measuring from the 'stop' on the magazine's spine to the bottom of the base plate is 1.580" ~ 1.585", and that measurement coupled with the variations from frame-to-frame will only let the magazine extend 1.5938" (1-19/32") pass the frame. Which is not bad at all for picking-up an extra 7 Rounds!
So, who all is in for at least 3 mags each, if we can make this happen. (Price per-mag should be around $35.00 each - like in the past).
Thanks a Million to Everyone for their much needed participation.
Bob Reed
Who all is interested in obtaining some new, 20 Rd, Mec-Gar Magazines for our beloved Browning Hi-Power!
First and foremost, we as a group should have at least a 3 mag per-member 'minimum order' requirement (5 mags minimum will greatly help) in getting the necessary attention for this endeavor to be successful. Obviously, 10 mags minimum per-member would greatly help our chances. (Personally, I'd love to see at least 1 Million of them in the hands of "The People" all across America, and at least that many again spread across the rest of the world).
Note: Mec-Gar's bluing is simply beautiful - however, I was hoping that Mec-Gar would either apply a Phosphate Finish or, their Anti-Friction Coating to these and, add witness holes down the magazine's spine (not along the side, but down the back) showing 5, 10, 15 and 20 rounds loaded. But, I'd gladly settle for their standard issue, blued ones w/out witness holes like the ones I already own & love.
Edited to add: For those that aren't familiar with Mec-Gar's 20 Rd Magazine for the Hi-Power; measuring from the 'stop' on the magazine's spine to the bottom of the base plate is 1.580" ~ 1.585", and that measurement coupled with the variations from frame-to-frame will only let the magazine extend 1.5938" (1-19/32") pass the frame. Which is not bad at all for picking-up an extra 7 Rounds!
So, who all is in for at least 3 mags each, if we can make this happen. (Price per-mag should be around $35.00 each - like in the past).
Thanks a Million to Everyone for their much needed participation.
Bob Reed
