|
|
Post by HRFunk on Sept 3, 2018 18:42:09 GMT -5
Hi All! I hope you're having a great Labor Day! I spent this past weekend working on refinishing a couple of firearms. If you're interested in seeing the results, check out the link below!
Howard
|
|
|
|
Post by Mister Coffee on Sept 3, 2018 19:03:58 GMT -5
Good video, Howard. I would have liked too have seen you removing the blue masking tape. Also, it looked like your coatings were getting onto the inside of the slide (through the ejection port). Is that a problem? Thanks.  |
|
|
|
Post by HRFunk on Sept 3, 2018 19:58:32 GMT -5
Good video, Howard. I would have liked too have seen you removing the blue masking tape. Also, it looked like your coatings were getting onto the inside of the slide (through the ejection port). Is that a problem? Thanks. Nope. I had a cartridge case held by the extractor up against the breech-face to keep the DC off of there, and I taped off the rails. It won't cause a problem anywhere else. HRF |
|
|
|
Post by Carolinaman on Sept 3, 2018 20:50:59 GMT -5
Hello Howard,
What a great and instructive video! I enjoyed it thoroughly!
Chris
|
|
|
|
Post by HRFunk on Sept 4, 2018 1:47:10 GMT -5
Hello Howard, What a great and instructive video! I enjoyed it thoroughly! Chris Thanks Chris! I’m glad you enjoyed it! Howard |
|
