Finding FEG Hi Power Parts on the Numrich website
May 18, 2017 17:20:21 GMT -5
mw4570 and erich like this
Post by jaypee on May 18, 2017 17:20:21 GMT -5
Numrich Arms is currently the only retail source of parts for the FEG Hi Power and Hi Power style pistols. A number of new factory parts for the FEG P9, P9M, and PJK-9HP single action FEG Hi Power pistols with the Browning style operating system are available there through this link to the home page:
www.gunpartscorp.com/
To reach the page having the parts you need, go to the “Find Parts - Search Manufacturers By Letter” section in the left center of the home page.
Once there click on the letter “K”.
When the list of manufacturers beginning with the letter “K” comes up, click on either “Kassnar” or “KBI.” Either one will get you to the same list of models.
(You won't find them under FEG.)
Click on the model PJK- 9HP. A schematic of the FEG Hi Power pistol will be displayed along with several pages of parts cross referenced to the part numbers in the schematic. Click on the parts you need and go from there.
To make things a little easier, here is the link that will take you directly to the schematic and the parts list:
www.gunpartscorp.com/Manufacturers/KBI-33331/AutoPistols-36858/PJK-9HPFEG-Hungary-35070.htm
NOTE: The P9M and PJK-9HP were manufactured with both the Browning and Smith and Wesson style operating systems at various times during their production runs. The guns manufactured with the Smith and Wesson operating system utilized a frame, slide, barrel, and recoil spring guide that are quite different from those found in the Browning style operating system, and are not shown in these listings. However, while there is no interchangeability of these major parts between guns made with the two different operating systems, there is a high degree of interchangeability of other small parts. So if you own a FEG Hi Power style pistol having the Smith and Wesson style operating system, you may still be able to find the correct small parts you need in these listings. Of particular interest is the presence of the FEG in-house slide stop on the site. These are hard to find.
If you are unable to find the factory FEG parts you need here, you might also consult the Parts Department at Browning Arms, or Brownells, or Midway USA to see if a compatible Browning Hi Power part is available.
www.gunpartscorp.com/
To reach the page having the parts you need, go to the “Find Parts - Search Manufacturers By Letter” section in the left center of the home page.
Once there click on the letter “K”.
When the list of manufacturers beginning with the letter “K” comes up, click on either “Kassnar” or “KBI.” Either one will get you to the same list of models.
(You won't find them under FEG.)
Click on the model PJK- 9HP. A schematic of the FEG Hi Power pistol will be displayed along with several pages of parts cross referenced to the part numbers in the schematic. Click on the parts you need and go from there.
To make things a little easier, here is the link that will take you directly to the schematic and the parts list:
www.gunpartscorp.com/Manufacturers/KBI-33331/AutoPistols-36858/PJK-9HPFEG-Hungary-35070.htm
NOTE: The P9M and PJK-9HP were manufactured with both the Browning and Smith and Wesson style operating systems at various times during their production runs. The guns manufactured with the Smith and Wesson operating system utilized a frame, slide, barrel, and recoil spring guide that are quite different from those found in the Browning style operating system, and are not shown in these listings. However, while there is no interchangeability of these major parts between guns made with the two different operating systems, there is a high degree of interchangeability of other small parts. So if you own a FEG Hi Power style pistol having the Smith and Wesson style operating system, you may still be able to find the correct small parts you need in these listings. Of particular interest is the presence of the FEG in-house slide stop on the site. These are hard to find.
If you are unable to find the factory FEG parts you need here, you might also consult the Parts Department at Browning Arms, or Brownells, or Midway USA to see if a compatible Browning Hi Power part is available.