|
|
Post by ToddSig on Aug 19, 2023 17:20:02 GMT -5
Figured I would kick-off the new CZ section with a few images. Show off you CZs! While mostly a Hi Power fanatic, I do have a few other manufacturers, including a few CZs. CZ75 P06 .40 cal, discontinued in 2016, compact, aluminum frame. Nearly forgot I had this model, it is pretty nice and I need to go out and shoot it, maybe even carry.  While a bit on the flashy/BBQ side, a CZ75 high polished stainless. Black rubber grips replaced with checkered cocobolo. This model was discontinued 2019. The CZ 75 B Stainless is the first stainless steel firearm to bear the CZ name.  |
|
|
|
Post by ruber on Aug 24, 2023 0:19:01 GMT -5
Very nice! Glad to see a CZ section here, seem to go hand in hand with the HP...  Dressed up with CZC wood grips a Kadet conversion kit...  My big, heavy brick of an SP01 with LOK grips:  And a pre-production 2004 RAMI in 40 with a 9mm conversion barrel I fitted (note the early RAMI's had front slide serrations). This was my first CZ pistol. Notice the contour on the upper portion of the backstrap below the tang is wider and smoother. Even with the difference in weight, I think the RAMI is more comfortable to shoot heavy loads in vs the other metal framed CZ's. Note that the new A01 series from CZC features this same contour. Hmmmm.....   It is timely too, I just picked up a project 75b SA. A little rough around the edges, but hope to get it cleaned up and back to stock soon. I'll post photos then. |
|
|
|
Post by ruber on Sept 4, 2023 15:00:44 GMT -5
Here's the SA:  More holster wear than anything, so pretty happy with it overall!! |
|
|
|
Post by ToddSig on Sept 4, 2023 18:49:53 GMT -5
Here's the SA: More holster wear than anything, so pretty happy with it overall!! I like that trigger. |
|
|
|
Post by ruber on Sept 4, 2023 19:11:00 GMT -5
Thanks! I mentioned earlier it was a project. There was a lot of rust on the internals, so it got some new parts from CGW. This is their SAO trigger. Almost no take up, pretty nice for a CZ. |
|
|
|
Post by Mister Coffee on Sept 4, 2023 19:15:33 GMT -5
Here's the SA: More holster wear than anything, so pretty happy with it overall!! I like that trigger, too. I was drawn to the SA. I'm a Hi-Power and 1911 kind of guy. But then I had to ask myself: Is it a CZ-75 experience without the DA? Of course, the correct answer is: Get both guns. |
|
|
|
Post by ToddSig on Sept 4, 2023 19:24:18 GMT -5
Here's the SA: More holster wear than anything, so pretty happy with it overall!! I like that trigger, too. I was drawn to the SA. I'm a Hi-Power and 1911 kind of guy. But then I had to ask myself: Is it a CZ-75 experience without the DA? Of course, the correct answer is: Get both guns.Totally agree, the straight trigger with the slight bend at the lower end looks so much better than the typical hook DA trigger on most CZs. "Get both guns", ALWAYS! |
|
|
|
Post by ruber on Sept 14, 2023 17:18:22 GMT -5
It was just a matter of time, right? CZ 75B SA with the Kadet 2 kit for 22lr:  |
|
|
|
Post by cmdrcody on Nov 17, 2023 13:08:18 GMT -5
  My Cold War commemorative CZ 75B |
|
|
|
Post by cmdrcody on Dec 7, 2023 6:40:59 GMT -5
My CZ97 BD I found these Coolhand G10 grips on their sight for 19.99! Been looking for replacement grips for a long time. The original grips from CZ aren’t bad and look like the Uncle Mikes grips for the BHP. Wanted extra grips since nobody seemed to make them. Got a blue/black set and a red/black set from the Coolhand site.   |
|
file
Member
Posts: 9
|
Post by file on Mar 21, 2024 17:10:45 GMT -5
After three Hi-powers I got myself a ČZ75. It's been in the box since 1991 without single round fired. It still has factory grease on the inside. The best part was the price, I got it for 300 Euros (325 USD)  |
|
